［尊享升級款］環保PCM雙感適溫寵物墊

寵物的雙感適溫王座

響應低碳環保理念，全品採接單訂製生產。標準色訂單製作週期為3-5個工作天，定制色訂單製作週期為4-6個工作天，運輸時效依物流安排。

產品材質（升級配置）

- 表層：雙面同款萊賽爾纖維（俗稱天絲）+棉質複合布，雙面均可接觸寵物使用

- 隔熱層：可拆式銀鋁複合隔熱墊（室溫低於23℃時，將銀面朝寵物放置可鎖住體溫，實現溫和保暖）

- 內膽：28℃ PCM相變物料（低於28℃自動蓄能固化，接觸寵物體表時緩慢釋放溫和涼感，帶來持久舒適的降溫體驗）

- 配件：樹脂四合扣無銳邊設計，拆裝方便，守護寵物安全

6大使用場景（適合小型犬貓）

1. 極速降溫：PCM內膽可放入冰櫃冷凍30分鐘，涼感持續約1小時；雙面萊賽爾面料緩衝低溫，守護寵物關節

2. 環保降溫：適配25.5℃節能冷氣溫度，室溫低於28℃自動蓄能，解決人感舒適、毛孩仍悶熱的痛點

3. 隔離地熱：凹凸鋁箔隔熱墊，阻隔地面熱氣上傳，墊面持久清爽不悶

4. 陰涼自結：置於28℃以下陰涼處即可自動蓄能，零耗電，居家戶外通用

5. 低溫鎖溫：室溫長期低於23℃時，取出PCM內膽後翻面使用，利用銀鋁隔溫層鎖住寵物體溫，溫和保暖，一墊冷暖兩用

6. 水床舒適：無論物料是否固化，墊身都有柔軟承托感，如躺水床般放鬆；雙面輪換使用，有效延長產品壽命

💡 溫度使用小貼士

✅ 24-26℃日常環境：萊賽爾（天絲）棉面朝上，搭配PCM內膽使用，釋放涼爽適溫

✅ 低於23℃環境：取出PCM內膽，翻面使用銀鋁隔溫層，鎖溫維持保暖適溫

💡 雙面均可正常使用，定期輪換可減少單面磨損，延長使用週期

注意事項

1. 請勿直接使用PCM內膽。外層布料可緩衝抓撓滲漏風險，降低寵物直接接觸風險

2. 本款為可拆式設計：

- 外罩：拆除銀鋁隔熱墊與PCM內膽後可機洗

- 銀鋁隔熱墊：可手洗，禁止大力揉搓、絞扭，輕壓清洗即可

- PCM內膽：僅可用濕布擦拭，不可浸水清洗

3. 清洗請使用中性洗滌劑，全部配件洗完後陰乾晾曬，避免陽光暴曬；請勿使用柔順劑、漂白劑

4. 拆裝四合扣請對準扣位輕壓扣合，勿大力撕扯，避免配件損壞

5. 請避免尖銳物品刮蹭面料與內膽，若出現大面積破損滲漏，請及時停用並更換

 Order Notice

［Premium］Eco PCM Dual Comfort Petpad

Pet’s Dual Comfort Temperature Throne

In line with low-carbon environmental protection concepts, all products are made-to-order. Standard color orders have a production lead time of 3–5 business days, and custom color orders have a production lead time of 4–6 business days. Delivery transit time depends on logistics arrangements.

Product Materials (Premium Upgrade)

- Top Layer: Double-sided identical Lyocell Fiber (commonly known as Tencel) + Cotton Blend Fabric. Both sides are safe for direct pet contact.

- Insulation Layer: Detachable silver aluminum composite heat insulation pad (when room temperature is below 23℃, place the silver foil side facing your pet to lock in body heat for gentle warmth).

- Inner Core: 28℃ PCM Phase Change Material. It automatically stores cooling energy and solidifies below 28℃, and slowly releases mild coolness when touching your pet’s body for long-lasting comfortable cooling.

- Fasteners: Burr-free resin snap buttons for easy assembly, safe for pets

6 Usage Scenarios (For Small Cats & Small Dogs Only)

1. Quick Cooling: Place the PCM inner core in the freezer for 30 minutes for around 1 hour of cooling effect. The double-sided Lyocell fabric buffers extreme low temperatures to protect pets’ joints.

2. Eco-Friendly Cooling: Optimized for 25.5℃ energy-saving air conditioning. It stores cooling energy automatically when room temperature is under 28℃, solving the issue where pets still feel stuffy even when humans feel comfortable.

3. Ground Heat Barrier: Textured aluminum foil insulation pad blocks ground heat from rising, keeping the pad surface fresh and non-stuffy for longer.

4. Auto Cooling In Shade: Automatically stores cooling energy when placed in shaded areas below 28℃. Zero power consumption, suitable for home and outdoor use.

5. Warmth Retention For Cool Rooms: When room temperature stays below 23℃, remove the PCM inner core and flip the pad over. The silver aluminum insulation layer locks your pet’s body heat for gentle warmth. One pad works for both cool and warm conditions.

6. Waterbed-Like Softness: Whether the material is solid or liquid, the pad provides soft supportive cushioning for a relaxing rest, just like lying on a waterbed. Rotating both sides effectively extends product lifespan.

💡 Temperature Usage Guide

✅ Daily environment 24–26℃: Place the Lyocell (Tencel) fabric side up with the PCM inner core installed for gentle cooling comfort.

✅ Environment below 23℃: Remove the PCM inner core, flip the pad, and use the silver aluminum layer to lock in body heat for warm comfort.

💡 Both sides are fully usable. Regular rotation reduces single-side wear and extends product life.

Important Notes

1. Do not use the PCM inner core alone. The outer fabric reduces risks of scratch damage and leakage, avoiding direct contact between pets and the core material.

2. This is a detachable design:

- Outer cover: Machine washable after removing silver aluminum pad and PCM inner core

- Silver aluminum insulation pad: Hand wash only, do not rub or wring hard, gently press to clean

- PCM inner core: Only wipe with a damp cloth, do not soak in water

3. Wash with mild detergent only. Air dry all components in shade, away from direct sunlight. Do not use fabric softener or bleach.

4. Align snap buttons properly and press gently to fasten. Do not pull forcefully to avoid damaging the fasteners.

5. Avoid sharp objects scratching the fabric and inner core. Discontinue use and replace the product if large-area rupture or leakage occurs.